Forum Klix.ba

Hitno potreban serial za
autodesk maya 8.0

Našao sam neki krek ali opet problemi:
Nije mi jasna sedma(7) rečenica:"7. Using the run utility and type: awkeygen.exe aw.dat"
moželi mi neko pojasniti šta zapravo treba
1. First Create a directory on the c: drive (even if you install maya on different drive) called
FLEXLM
2. Copy the aw.dat and awkeygen.exe file to this directory.
3. Install Maya
4. Goto start-->all programs-->Autodesk-->common utilities-->FlexLM license utilities
5. Under system settings copy Ethernet address
6. Open the file (from the directory FLEXLM) aw.dat with Wordpad and replace the words "your host"
with the copied Ethernet address. Save and close wordpad
7. Using the run utility and type: awkeygen.exe aw.dat
8. Goto start-->all programs-->Autodesk-->Maya 8.0-->Install license
select "I would like to install license from a file"
9. Browse to the path of the file aw.dat
10. Click install
11. Restart computer

i ovaj dio mi je nejasan
OSX:
---
Your license (default) dir is /var/flexlm
so copy the generated aw.dat (you did that on a windows machine in dos)
into that directory.
Ako ko zna za kakav serial nek napiše za "Maya 8.0"

otvori start-meni na windowsu pa ces vidjeti run na desnoj strani. pritisni run i upisi sta ti je receno.

A imas i shortcut da otvoris run, to ti je windows logo + R

Taj OSX valjda se odnosi na macintosh

kada sve uradim kao što je gore navedeno i kliknem na view instalation logo naiđem i ovu poruku(između ostalih:
Feature MayaUnltd on line 1 has a sign value 0 of invalid length. FLEXlm may not recognize this feature. Source: C:/FLEXLM/aw.dat
Ako je ko prije instalirao maya 8 i krekovo ga na ovaj način neka mi objasni
ili ako ko zna serial number
hitno potrebno

Kako sam ja uradio:
1.Instalirao sam maya 8.0
2.napravio folder FLEXLM na C:\FLEXLM i kopirao aw.dat i awkeygen.exe
3.pokrenuo start-->all programs-->Autodesk-->common utilities-->FlexLM license utilities
4.i naspram "Ethernet address" kopirao "001676c2591c"
5.pokrenuo iz worpad-a aw.dat iz C:\FLEXLM
6.kada istom otvorim samo se sljedeće od teksta u njemu nalazi:
"FEATURE MayaUnltd sgiawd 8.000 permanent uncounted 0 \
HOSTID=your_host"
7.markiram "your_host" i nalijepim preko njega "001676c2591c"
i spasim promjene i zatvorim worpad.
8.pokrenem START>RUN i prvi put nađem putanju za awkeygen.exe(bude otvoren kao prozor u dosu) i
drzgi put za aw.dat(u browse moram staviti all files,bude otvoren prozor u kojem traži da selektuje program
sa kojim ću da otvorim taj dokument(open with>select program form the list...??? )
9.pokrenem start-->all programs-->Autodesk-->Maya 8.0-->Install license
10.u prozoru koji mi se otvori prvo odaberem "I HAVE a LICENsETHAT I NEED TO INSTAL"
11.zatim "I would like to install license from a file"
12.u browse odabrem putanju do aw.dat i instalira se
13.i u INSTALATION LOG kada kliknem prikaže se:
"License Installation Report

Installing from license file C:/FLEXLM/aw.dat.
Input license contains 1 license(s) matching this computer.

License #1

Attempting Installation to license file: C:/FLEXlm/aw1.dat
Source file C:/FLEXLM/aw.dat contains errors and/or warnings. Please see below for detailed information.

Successful Operations:
Added feature line: FEATURE MayaUnltd sgiawd 8.000 permanent uncounted 0 HOSTID=001676c2591c


Warnings:
Feature MayaUnltd on line 1 has a sign value 0 of invalid length. FLEXlm may not recognize this feature. Source: C:/FLEXLM/aw.dat


Errors:
(none)

End of license installation report."
14.kada restartujem PC MAYA 8.0 nije registrovana.
Pomozite u čemu je problem???

prijateljuuuuu al si ti zakomplikov'o

ovako brate u tom nekom crack folderu (koji jos uvijek ne mora biti flexlm) nadjes aw.dat i otvoris ga u notepadu. Za hostid upises svoju ethernet adresu. Spasis i zatvoris dokument.
Pokrenes dos i lociras crack folder, napises komandu - awkeygen.exe aw.dat
sve u jednom redu...

nakon toga prekopiras generisani aw.dat u flexlm na rootu.

and that would be all

Kako misliš pokreneš DOS:
Strat>all programs accessories>command prompt ili...???
i kada pokrenem command prompt kad u njega ukucam putanju do
folder u kojem sam kopirao aw.data(u koju sam sa worpad-om
umjesto your_host ukucao "Ethernet address"(tj."001676c2591c")
i awkeygen.exe to jest folder c:\flexlm ispod ispiše "bad internal or
external command.
I možešli mi malo bolje pojasniti cijelu proceduru.
Pleas.....

jah, ili start - run pa ukucas cmd

i kad se pozicioniras u folder u kojem ti se nalazi keygen i aw.dat sa prekopiranom ethernet adresom (nemoj ga odmah prekopirati u flexlm, tek poslije, kad ga izgenerises) pises u jednom redu:
awkeygen.exe aw.dat

to mora raditi